1. Insert the Windows XP CD-ROM and reboot the computer
If you see a message about hitting any key to boot the CD, do so now.
Otherwise, you will see a message about Setup inspecting your system.
2. MS-DOS portion of Setup begins
In the first stage of Setup, you will see a series of blue and gray MS-DOS-based screens. In the first step, you will be asked to press F6 if you need to install any third-party or RAID drivers.
Then, you can press F2 to initiate the Automated System Recovery (ASR) tool, a new XP feature that lets you recover non-booting systems from XP Setup. Ignore this.
Finally, Setup will load the files it needs to start a bare bones version of XP. This may take a few minutes.
3. Welcome to Setup
Finally, Setup begins. In this step, you can set up XP, launch the Recovery Console (another, more complicated system recovery tool), or quit.
Press ENTER to continue Setup, and it will examine your hard drives and removable disks.
4. Read the license agreement Next, you'll have to agree to Microsoft's complex licensing agreement. Among the highlights: You don't actually own Windows XP and you can only install it on one PC.
No one reads this, I know, but it's probably a good idea to at least check it out.
Hit F8 to continue.
Upgrade versions only:
4b. Insert qualifying media If you are attempting to clean install with a Windows XP Home or Pro Upgrade CD, you will see this screen, which requires you to insert your previous Windows CD in order to verify that you qualify for the Upgrade version.
Once you've proven that you qualify, hit ENTER to continue.
5. Choose an installation partition
This crucial step lets you choose where to install XP. On a clean install, you will typically install to the C: drive, but you might have other ideas, especially if you plan to dual-boot with 9x. Setup will show you all of your available disks (in this case, just one) and let you create and delete partitions as needed. So, for example, if you have one disk, but would like to create two partitions, one for XP and one for your data, you can do that here.
6. Select the file system
If you created a new partition, or wish to change the file system of an existing partition, you can do so in the next step. Generally speaking, I recommend going with the NTFS file system, which is more secure than FAT.
Regardless of which file system you choose, be sure to select one of the "quick" format options (the top two choices), if you do need to format, since these will work much more quickly than a full format.
In this example, I've selected an existing FAT32 partition and elected to format it in NTFS format.
7. Optionally format the partition
If you did choose to change or format the file system, this will occur next. First, you'll be asked to verify the format. If you're installing XP on a system with more than one partition, especially one that still holds your data on one of the partitions, be sure you're formatting the correct partition.
Hit F to continue, and a yellow progress bar will indicate the status of the format. When this is complete, Setup will again examine your disks, and create a list of files to copy.
8. Setup folder copy phase and reboot
Setup will now copy system files to the system/boot partition(s) you just created. This will allow the PC to boot from the C: drive and continue Setup.
When the file copy is complete, Setup will initialize and save your XP configuration. It will then reboot your PC.
When the system reboots, you will probably see the "Press any key to boot from CD" message again. If this happens, do not press a key: Setup will now boot from your C: drive. In the event that you cannot prevent the CD-based Setup from reloading, eject the CD and reboot. Setup will ask for the CD when needed.
9. GUI Setup begins Once the system reboots, you will be presented with the GUI Setup phase, which is much more attractive than the DOS-mode phase. As you progress through GUI Setup, you can read promotional information about XP on the right side of the screen if you're bored.
Next, your hardware devices are detected. This could take several minutes.
10. Regional and language Options In the first interactive portion of GUI Setup, you can choose to customize the regional and language settings that will be used by XP, as well as the text input language you'd like. Users in the United States will not normally need to change anything here.
Click Next to continue.
11. Personalize your software Now enter your name and, optionally, your company.
The name you enter is not the same as your user name, incidentally, so you should enter your real name here
Click Next to continue.
12. Enter your product key Now you must enter the 25-character product key that is located on the orange sticker found on the back of the CD holder that came with Windows XP. You cannot install XP without a valid product key.
Later on, you will be asked to activate and optionally register your copy of Windows XP. A product key can be used to install XP on only one PC.
Click Next to continue.
13. Enter a computer name and administrator password In the next phase of Setup, you can create a name for your computer (which is used to identify it on a network) and, optionally in Pro Edition only, a password for the system Administrator, the person who controls the PC (this will generally be you, of course).
Setup generates a random name for your PC, but it's always nasty looking, so I recommend renaming it to something more logical .After Setup is complete, you can provide a better description of the PC too .
In XP Pro, the Administrator password is optional--that is, you can leave it blank--but I strongly recommend that you provide a good password here for security reasons. XP Home doesn't allow you enter an Administrator password, as this account is more hidden on Home installs for some reason. So you can only enter a machine name in Home Edition.
Click Next to continue.
14. Supply your date and time settings Next, you can supply the date and time, which are auto-set based on information in your BIOS, and the time zone. Change these as appropriate.
Click Next to continue.
15. Network setup If you have a networking card or modem, Setup now installs the networking components, which include the client for Microsoft networks, File and Print Sharing, the Quality of Service Packet Scheduler, and the TCP/IP networking protocol by default.
16. Choose networking settings In this phase, you can choose to keep the default settings (recommended) or enter custom settings. I recommend later disabling, but for now, it's generally best to leave it as-is, unless you have specific needs dictated by your ISP or network.
Note that XP doesn't include the legacy NetBEUI protocol out of the box. If you want to use this protocol, you will need to install it later from the XP CD-ROM.
Click Next to continue.
In Windows XP Professional only, you will be able to select a workgroup or domain name next. Home Edition doesn't work with Windows domains, however, and Setup will automatically supply the workgroup name MSHOME,.
Click Next to continue.
17. Setup completion Setup will now copy files, complete installation, install your Start Menu items, register system components, save settings, remove any temporary files needed by Setup, and then reboot.
Again, you will probably see the "Press any key to boot from CD" message on reboot. If this happens, do not press a key, and your new XP install will boot up. You can remove the XP Setup CD now.
18. First boot You'll be greeted by the XP splash screen on first boot (this actually appears briefly when you rebooted into GUI Setup as well).
The splash screens for XP Pro and Home are subtly different.
19. Change display settings Users with CRT monitors and some LCDs (such as laptops and flat panel displays) will see a Display Settings dialog appear, which asks whether you'd like XP to automatically set the resolution. This will generally change the resolution from 800 x 600 to 1024 x 768 on a CRT monitor, or to the native resolution of an LCD display.
Click OK and let XP change the resolution. Then, accept the settings if the screen display changes and can be read. If you can't see the display, it will time out after 30 seconds and return to the sub-optimal 800 x 600 resolution.
Click OK to accept the screen resolution change.
20. Welcome to Microsoft Windows
Click Next to continue.
21. Network setup In the opening OOBE phase, you are asked to set up your network/Internet connection, which is required for activation and registration. If you selected the default networking configuration during Setup and know it will work (because you're connected directly to a cable modem, perhaps, or are on a local area network), then select Yes (the default). Otherwise, you can select No and then Skip.
We'll assume that your network is up and running and select Yes.
Click Next to continue.
22. Optionally activate and register Windows If you selected Yes in the previous step, you are asked if you'd like to activate Windows XP. This will tie your copy of XP to the current PC semi-permanently, so be sure this is what you want. Activation requires a connection to the Internet, but you can perform this step later if you want ,
I recommend selecting No here, since you can activate later easily enough. If you do select Yes, you are asked whether you'd like to register the product. Then Click Next.
23. Set up users Now, you can set up the user names of the people who will be using the PC. You will want at least one user (for you), since you shouldn't be logging on as Administrator. Curiously, each user you do create here has administrative privileges, however, and no password (!). You should set up your users correctly with passwords as soon as possible (see Post-installation tasks, below, for details).
This phase lets you create up to one users. You can create more, or manage users, using the User Accounts tool in Control Panel.
Click Finish when done creating users. At this point, OOBE ends and you're reading to go. Click Finish again.
